heavy WCB Cast steel PN160 bar Gate Valve GVC-00160-12
Quick Detail:?heavy WCB Cast steel PN16 bar Gate Valve
Design standard: DIN PN160
Body material: WCB.
Nominal diameter: 12”
Pressure: CL600LBS
End connection: RF.
Face to face: DIN F4 F5 F7
Bolted Bonnet Design
OS&Y stem.
Working temperature: -29℃~+425℃.
Mode of operation: hand wheel
Test and inspection: API 598.e
?
Products Range:
Available Material: CS, SS, SDSS, Alloy Steel.
Optional stem/shaft: A182F6a, A182F304, A182F316, F51/F53
Optional seal/Seat: Stelite ,2CR13, SS304, SS316, duplex stainless steel ?
Optional End connection: BW ANSI B16.25
Flanged ANSI B16.5
?Threaded ANSI b16.11
Optional Operation: Gearbox, Electric, Pneumatic, Electro hydraulic actuator.
Range of the size diameter: 1/2″~60″ (DN15~DN1500).
Range of the Rating: 150lbs~2500lbs (PN16~PN420).
Customized Design is negotiable.
?
Operation
Gate valves must be oriented in the vertical position any time the valve is operated or cycled.
Personnel installing the operator must ensure there is no abnormal stem movement or run out during operation. All “stops” and or “limits” must be correctly set to prevent damage or unnecessary wear to the valve.
Testing
Applies to all methods of hydro testing and pre-commissioning testing.
Gate valves must be oriented in the vertical position during any operation and testing processes.
Procedures must be compliant to API specifications.
Installation
Gate valves must be installed and operated in the vertical position only.
Gate valves must always be either fully open, or fully closed once installed and are not designed or
intended for throttling applications.
Available Material: CS, SS, SDSS, Alloy Steel.
Optional stem/shaft: A182F6a, A182F304, A182F316, F51/F53
Optional seal/Seat: Stelite ,2CR13, SS304, SS316, duplex stainless steel ?
Optional End connection: BW ANSI B16.25
Flanged ANSI B16.5
?Threaded ANSI b16.11
Optional Operation: Gearbox, Electric, Pneumatic, Electro hydraulic actuator.
Range of the size diameter: 1/2″~60″ (DN15~DN1500).
Range of the Rating: 150lbs~2500lbs (PN16~PN420).
Customized Design is negotiable.
Operation
Gate valves must be oriented in the vertical position any time the valve is operated or cycled.
Personnel installing the operator must ensure there is no abnormal stem movement or run out during operation. All “stops” and or “limits” must be correctly set to prevent damage or unnecessary wear to the valve.
Testing
Applies to all methods of hydro testing and pre-commissioning testing.
Gate valves must be oriented in the vertical position during any operation and testing processes.
Procedures must be compliant to API specifications.
Installation
Gate valves must be installed and operated in the vertical position only.
Gate valves must always be either fully open, or fully closed once installed and are not designed or
intended for throttling applications.
petroleum, chemical, Stem, Oil, Gas, Construction, pharmaceutical, light textile, electric power, , environmental protection and energy systems
