concentric flanged Butterfly Valves for water project BFV-1012
Quick Detail:Pneumatic concentric flanged Butterfly Valves for water project
Design standard: API 609.?
Body material: GGG50
Nominal diameter: DN200
Pressure: PN16
End connection: RF. Raised Face
Face to face: ISO5752, EN558 Series 13
short Body type
Top flange ISO5211.
Bi-direction Seal
Vulcanized Rubber Seat
Mode of operation: Pneumatic actuator
Test and inspection: API 598. EN1226
?
Product Range
Available Body Material: GGG40/GGG50/GGG60, CS/SS304/SS316?
Optional Seat: EPDM, NBR
Optional End connection: Wafer, Lug, Flanged.
Optional Body Design: Eccentric or Concentric centerline
Face to face: EN558 Series 13/14, long type or short type
Normal diameter: 2″~96″ (DN50~DN2400).
Pressure range: PN10, PN16, PN25 (PN10~PN25).
Available Operation: Gearbox, Electric, pneumatic actuator
Working temperature: -40℃~+130℃.
?
Performance:
The valve adopts series AW type pneumatic actuator fork drive, with reasonable structure and large output torque, with optional of double-acting type or? single-acting type
?
1. Pneumatic butterfly valve gear type with double piston, large output torque and small volume.
2. The cylinder is made of aluminum and gold material, with light weight and beautiful appearance.
3. Manual operation mechanism can be installed on the top and bottom.
4. Rack connection can adjust the opening angle and rated flow.
5. Butterfly valve actuators can be equipped with electrical signal feedback instructions and various accessories to realize automatic operation.
6. IS05211 standard connection provides convenience for product installation and replacement.
7. The adjustable screws at both ends can make the standard products have an adjustable range of ± 4 ° at 0 ° and 90 °. Ensure the synchronization accuracy with the valve.
?
Application:
?
widely used in general industries such as petroleum, gas, chemical, and water treatment, ?in cooling water systems of thermal power stations.
Available Body Material: GGG40/GGG50/GGG60, CS/SS304/SS316?
Optional Seat: EPDM, NBR
Optional End connection: Wafer, Lug, Flanged.
Optional Body Design: Eccentric or Concentric centerline
Face to face: EN558 Series 13/14, long type or short type
Normal diameter: 2″~96″ (DN50~DN2400).
Pressure range: PN10, PN16, PN25 (PN10~PN25).
Available Operation: Gearbox, Electric, pneumatic actuator
Working temperature: -40℃~+130℃.
The valve adopts series AW type pneumatic actuator fork drive, with reasonable structure and large output torque, with optional of double-acting type or? single-acting type
?1. Pneumatic butterfly valve gear type with double piston, large output torque and small volume.
2. The cylinder is made of aluminum and gold material, with light weight and beautiful appearance.
3. Manual operation mechanism can be installed on the top and bottom.
4. Rack connection can adjust the opening angle and rated flow.
5. Butterfly valve actuators can be equipped with electrical signal feedback instructions and various accessories to realize automatic operation.
6. IS05211 standard connection provides convenience for product installation and replacement.
7. The adjustable screws at both ends can make the standard products have an adjustable range of ± 4 ° at 0 ° and 90 °. Ensure the synchronization accuracy with the valve.
?
widely used in general industries such as petroleum, gas, chemical, and water treatment, ?in cooling water systems of thermal power stations.
?
