Quick Detail
Design standard: ANSI B16.34
Body material: Carbon steel
Nominal diameter: DN100 4″ 6″
Pressure: 300LBS PN25 PN40 PN64
End connection: Butt Welded.
Seal: RPTFE NYLON DEVLON PEEK
Face to face: ANSI B16.10 or customized
Mode of operation: Gear Box
Test and inspection: API 598.
Working Temperature: -29℃~+120℃.

Features
1. The processing of the sphere is tracked and tested by an advanced computer detector; the accuracy of the sphere is very high.
2. The material of the valve body is the same as that of the pipeline, there will be no uneven stress, no deformation due to shakes and vehicles passing through the ground, and the pipeline is resistant to aging.
3. The seal ring body is made of 25% Carbon (carbon) RPTFE material to ensure no leakage (0%).
4. The submerged welded ball valve can be directly buried in the ground, without the need to build a large valve well, only a small shallow well on the ground is needed, which greatly saves construction costs and engineering time.
5. The length of the valve body and the height of the valve stem can be adjusted according to the construction and design requirements of the pipeline
6. The processing accuracy of the sphere is very precise, the operation is light, and there is no bad interference.
7. Using high-grade raw materials, it can keep the pressure above PN25.
8. Compared with products of the same specifications in the same industry, the valve body is small and the appearance is beautiful.
9. Under the condition that the valve is normally operated and used, the service life is long.

Full bore or reducing bore

Optional Ends: BW, flanged

Optional seal: PTFE, RPTEF, Metal Seated

Available Body Material: ASTM A216WCB/LCB/CF8M/4A/5A/Alloy Steel

Available Ball : SS304, SS316, Solid Type, A105+ENP.

Pressure Range: 150LBS-1500LBS , PN10-PN250

Size Range: 2”-36” DN50-DN900mm

Face to face Dimension: up to 2000MM

Stem extension: up to 3000MM

Drain and vent Plugs available

Reliable sealing performance and small torque;

Full bore and reduced bore;

Low emission packing;

Fire safe, Anti-static and anti-blowout stem design;

Optional locking device

Optional ISO 5211 top flange.

Smooth Electroless nickel plated ball for bubble tight sealing and low operating torques

Bi-Directional flow

Double sealing on stem, stem gland and closure connections

Seats insure low and high pressure sealing and body cavity self-relief

Seat Injection fitting with internal check valve for emergency sealing

Suitable medium: Oil/Gas, LNG/LPG, Petrochemical, Steel mills, Heating pipes etc.